Azboz SMARGO-USB2Serial FTDI

[nitrogen14]

хочу разобраться со своим ридером

Spoiler

http://myazbox.de/forum/index.php?page=Thread&threadID=1262

Connect to you Box with FTP.
Load the .ko Files to e.g. /tmp (/tmp will be resettet after poweroff or reboot!).
Then connect with Telnet to you Box and type these two commands:

insmod /tmp/usbserial.ko
insmod /tmp/ftdi_sio.ko (if you have a FTDI based device)
insmod /tmp/pl2303.ko (if you have a PL2303 based device)

Put now your USB2Serial converter into usb and type

dmesg

was you device recognized?
This should look like:

usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
drivers/usb/serial/usb-serial.c: descriptor matches
drivers/usb/serial/usb-serial.c: found bulk in on endpoint 0
drivers/usb/serial/usb-serial.c: found bulk out on endpoint 1
ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/usb-serial.c: get_free_serial 1
drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0
drivers/usb/serial/usb-serial.c: usb_serial_probe - setting up 1 port structures for this device
drivers/usb/serial/ftdi_sio.c: Detected FT232BM
drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0
usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver


Smargo Reader en newcs also should work (with FTDI module)!

---------------

попытаюсь поставить эту хрень и посмотреть, как на это дело отреагирует oscam


нынче вижу такое (вроде таже хрень):

usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver

---------------

MMP[/]$ insmod /tmp/usbserial.ko
Using /tmp/usbserial.ko
insmod: cannot insert `/tmp/usbserial.ko': Success (17): Success
MMP[/]$ insmod /tmp/ftdi_sio.ko
Using /tmp/ftdi_sio.ko
insmod: cannot insert `/tmp/ftdi_sio.ko': Success (17): Success
MMP[/]$ insmod /tmp/pl2303.ko
Using /tmp/pl2303.ko
MMP[/]$

-->

drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver

---------------
сцуко, разницы с моей награ3 картой никакой

2010/01/11 21:07:15 1090 s reader started (pid=1096, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2010/01/11 21:07:15 1090 s Waiting for local card init ....
2010/01/11 21:07:15 1095 h HTTP Server listening on port 88
2010/01/11 21:07:18 1096 r03 card detected
2010/01/11 21:07:23 1096 r03 ATR: ххххххххххххххххххххххххххххххххххх
2010/01/11 21:07:28 1096 r03 card system not supported
2010/01/11 21:07:28 1096 r03 card initializing error
2010/01/11 21:07:28 1090 s Init for all local cards done !
2010/01/11 21:07:28 1090 s anti cascading disabled