Твитнуть
Re: JTAG на Azbox - первое впечатление и попытка победить вечный "BOOTING"
вот лог в txt часть 1 (выложен полностью на файлообменник, см. сообщение от Wolk)
вот лог в txt часть 1 (выложен полностью на файлообменник, см. сообщение от Wolk)
Spoiler
AZBox[~]$ /MMP/usr/bin/S.sh
[Debug Mode] Begin of start.sh ###
Display mode: FND
Fail to Receive ACK 00
Display mode: FND
Fail to Receive ACK 00
Display mode: FND
Fail to Receive ACK 00
interfaces ok
Display mode: FND
Fail to Receive ACK 00
Using /MMP/modules/2.6.15/llad.ko
insmod: cannot insert `/MMP/modules/2.6.15/llad.ko': Success (17): Success
Using /MMP/modules/2.6.15/em8xxx.ko
insmod: cannot insert `/MMP/modules/2.6.15/em8xxx.ko': Success (17): Success
Using /MMP/modules/2.6.15/sckernel.ko
>>>>>>> CONFIG_TANGO2 :: HZ = 1000
scard: SMP8634 driver loaded (rd_buffer_size = 288, wr_buffer_size = 288, freq = 3600000)
Using /MMP/modules/2.6.15/usbserial.ko
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
Using /MMP/modules/2.6.15/ftdi_sio.ko
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
Using /MMP/modules/2.6.15/cdrom.ko
Using /MMP/modules/2.6.15/sr_mod.ko
Using /MMP/modules/2.6.15/fuse.ko
fuse: Unknown symbol r4k_flush_cache_page
insmod: cannot insert `/MMP/modules/2.6.15/fuse.ko': Success (2): Success
Using /MMP/modules/2.6.15/rt61.ko
PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
RT61: Vendor = 0x1814, Product = 0x0301
PCI: Setting latency timer of device 0000:00:03.0 to 64
Using /MMP/modules/2.6.15/rt3070sta.ko
rtusb init --->
usbcore: registered new driver rt2870
insmod: rt2500.ko: no module by that name found
RT61: RfIcType= 3
mknod: /dev/scard: File exists
Checking Security.
Init semaphore key(0x20080901) mode(384)
co164_send: call, devaddr = 0x28, subaddr = 0x00, size = 8
SEND DATA1 = 0x42 0xc2 0x46 0xe3 0x89 0xac 0xfd 0xdf
SEND DATA2 = 0x42 0xc2 0x46 0xe3 0x89 0xac 0xfd 0xdf
co164_recv: call, devaddr = 0x28 size = 8
RECV DATA = 0xf6 0x17 0x46 0xb8 0x00 0x4c 0x17 0xac
hx_security_check: SECURITY_CHECK_RESULT = 1 (rand = 16807)
unlink fail!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!: No such file or directory
unlink fail!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!: No such file or directory
[Debug Mode] Begin of start.sh ###
Display mode: FND
Fail to Receive ACK 00
Display mode: FND
Fail to Receive ACK 00
Display mode: FND
Fail to Receive ACK 00
interfaces ok
Display mode: FND
Fail to Receive ACK 00
Using /MMP/modules/2.6.15/llad.ko
insmod: cannot insert `/MMP/modules/2.6.15/llad.ko': Success (17): Success
Using /MMP/modules/2.6.15/em8xxx.ko
insmod: cannot insert `/MMP/modules/2.6.15/em8xxx.ko': Success (17): Success
Using /MMP/modules/2.6.15/sckernel.ko
>>>>>>> CONFIG_TANGO2 :: HZ = 1000
scard: SMP8634 driver loaded (rd_buffer_size = 288, wr_buffer_size = 288, freq = 3600000)
Using /MMP/modules/2.6.15/usbserial.ko
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
Using /MMP/modules/2.6.15/ftdi_sio.ko
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
Using /MMP/modules/2.6.15/cdrom.ko
Using /MMP/modules/2.6.15/sr_mod.ko
Using /MMP/modules/2.6.15/fuse.ko
fuse: Unknown symbol r4k_flush_cache_page
insmod: cannot insert `/MMP/modules/2.6.15/fuse.ko': Success (2): Success
Using /MMP/modules/2.6.15/rt61.ko
PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
RT61: Vendor = 0x1814, Product = 0x0301
PCI: Setting latency timer of device 0000:00:03.0 to 64
Using /MMP/modules/2.6.15/rt3070sta.ko
rtusb init --->
usbcore: registered new driver rt2870
insmod: rt2500.ko: no module by that name found
RT61: RfIcType= 3
mknod: /dev/scard: File exists
Checking Security.
Init semaphore key(0x20080901) mode(384)
co164_send: call, devaddr = 0x28, subaddr = 0x00, size = 8
SEND DATA1 = 0x42 0xc2 0x46 0xe3 0x89 0xac 0xfd 0xdf
SEND DATA2 = 0x42 0xc2 0x46 0xe3 0x89 0xac 0xfd 0xdf
co164_recv: call, devaddr = 0x28 size = 8
RECV DATA = 0xf6 0x17 0x46 0xb8 0x00 0x4c 0x17 0xac
hx_security_check: SECURITY_CHECK_RESULT = 1 (rand = 16807)
unlink fail!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!: No such file or directory
unlink fail!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!: No such file or directory
Комментарий