Твитнуть
Re: Проблема с MGCAMD
Чтобы убрать гипотетически возможное влияние mpcs настраиваюсь на работу на прямую наружу:
newcamd.list
mg_cfg
есть еще priority, replace и ignore
Чтобы убрать гипотетически возможное влияние mpcs настраиваюсь на работу на прямую наружу:
newcamd.list
Spoiler
CWS_INCOMING_PORT = 12000
CWS = xxx.xxx.xxx.xxx xxxxx login pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv #023700
CWS = xxx.xxx.xxx.xxx xxxxx login pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv #023700
mg_cfg
Spoiler
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show any ECMs
# 01 show only valid ECMs (default)
# 02 show valid and bad ECMs with complete data display
C: { 01 }
# AU
# 01 enable AU
# 02 AU Auto
# 03 network cards update only
A: { 00 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 replace (not add) http-aes keys, only first key replaced !
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
G: { 09 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
N: { 07 }
# network ecm timeout in seconds
K: { 5 }
# newcamd dead routes connect retry, sec
Q: { 300 }
# network shares priority
# 00 newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd
# 02 newcamd, camd3, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
O: { 00 }
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
S: { 03 }
# Log option, summ of:
# 00 Off
# 01 Network
# 02 console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
L: { 04 } 172.16.1.1 8028 /DATA/hdb1/mgcamd.log
# keep ecm cache, seconds
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 06 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 01 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }
# urls for aes keys update, any number or urls allowed,
# url data must contain key in format 0500:007C00:0000000000:00:key1:keyl
#W: { http://some.host.com/keys.php }
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show any ECMs
# 01 show only valid ECMs (default)
# 02 show valid and bad ECMs with complete data display
C: { 01 }
# AU
# 01 enable AU
# 02 AU Auto
# 03 network cards update only
A: { 00 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 replace (not add) http-aes keys, only first key replaced !
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
G: { 09 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
N: { 07 }
# network ecm timeout in seconds
K: { 5 }
# newcamd dead routes connect retry, sec
Q: { 300 }
# network shares priority
# 00 newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd
# 02 newcamd, camd3, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
O: { 00 }
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
S: { 03 }
# Log option, summ of:
# 00 Off
# 01 Network
# 02 console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
L: { 04 } 172.16.1.1 8028 /DATA/hdb1/mgcamd.log
# keep ecm cache, seconds
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 06 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 01 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }
# urls for aes keys update, any number or urls allowed,
# url data must contain key in format 0500:007C00:0000000000:00:key1:keyl
#W: { http://some.host.com/keys.php }
есть еще priority, replace и ignore
Spoiler
#NTV+
V: { 02 37 00 }
V: { 03 06 00 }
V: { 04 06 00 }
#PoverkhnostTV
X: { 06 54 }
I: { 00 00 01 }
I: { 00 00 00 }
#TRICOLOR 36E
V: { 00 00 00 }
X: { 4A E0 }
MMP[mpcs]$ more ../mgcamd/replace.list
# replace old with new {{ sid } { caid } { provid } { ecmpid } { newcaid } { newprovid } { newecmpid }}
#NTV+
R: {{ 2F4A } { 500 } { 030600 } { 0bbe } { 0 } { 0 } { 0 }} #MTVHD
R: {{ 2F45 } { 500 } { 030600 } { 0bb9 } { 0 } { 0 } { 0 }} #HD Kino
R: {{ 2F46 } { 500 } { 030600 } { 0bba } { 0 } { 0 } { 0 }} #HD Sport
R: {{ 2F47 } { 500 } { 030600 } { 0bbb } { 0 } { 0 } { 0 }} #HD Life
R: {{ 2F48 } { 500 } { 030600 } { 0bbc } { 0 } { 0 } { 0 }} #HD Eurosport
R: {{ 2F49 } { 500 } { 030600 } { 0bbd } { 0 } { 0 } { 0 }} #HD Discovery
R: {{ 277E } { 500 } { 030600 } { 0bc2 } { 0 } { 0 } { 0 }} #Kino Plus
R: {{ 28A5 } { 500 } { 040600 } { 07d5 } { 0 } { 0 } { 0 }} #Sport Soyuz
MMP[mpcs]$ more ../mgcamd/ignore.list
# ignore viaccess providers
V: { 04 06 10 }
V: { 02 37 00 }
V: { 03 06 00 }
V: { 04 06 00 }
#PoverkhnostTV
X: { 06 54 }
I: { 00 00 01 }
I: { 00 00 00 }
#TRICOLOR 36E
V: { 00 00 00 }
X: { 4A E0 }
MMP[mpcs]$ more ../mgcamd/replace.list
# replace old with new {{ sid } { caid } { provid } { ecmpid } { newcaid } { newprovid } { newecmpid }}
#NTV+
R: {{ 2F4A } { 500 } { 030600 } { 0bbe } { 0 } { 0 } { 0 }} #MTVHD
R: {{ 2F45 } { 500 } { 030600 } { 0bb9 } { 0 } { 0 } { 0 }} #HD Kino
R: {{ 2F46 } { 500 } { 030600 } { 0bba } { 0 } { 0 } { 0 }} #HD Sport
R: {{ 2F47 } { 500 } { 030600 } { 0bbb } { 0 } { 0 } { 0 }} #HD Life
R: {{ 2F48 } { 500 } { 030600 } { 0bbc } { 0 } { 0 } { 0 }} #HD Eurosport
R: {{ 2F49 } { 500 } { 030600 } { 0bbd } { 0 } { 0 } { 0 }} #HD Discovery
R: {{ 277E } { 500 } { 030600 } { 0bc2 } { 0 } { 0 } { 0 }} #Kino Plus
R: {{ 28A5 } { 500 } { 040600 } { 07d5 } { 0 } { 0 } { 0 }} #Sport Soyuz
MMP[mpcs]$ more ../mgcamd/ignore.list
# ignore viaccess providers
V: { 04 06 10 }
Комментарий